Changing the Position of a Sticker; Press ; Select the connecting position for the third - Page 22

21

u

Select the connecting position for the third 
pattern and then press 

. In this 

example, we will select the left point of the 
top edge for the third pattern.

• Pattern rotates automatically when corner position is 

selected.

a

Reference edge and reference point

b

Third pattern [3]

c

Second pattern [2]

v

Follow the on-screen instruction to perform 
steps 

k

 to 

p

.

w

Press 

, then press 

 and then 

press the start/stop button to embroider the 
third pattern.

→

After embroidering of the third pattern is finished, 
the following message appears. When finished 

connecting patterns, press 

.

→

After embroidering is finished, 

 at the top left 

side of the screen disappears.

The three patterns have been connected.

Press 

 to clear the pattern.

Changing the Position of a Sticker

If the selected pattern or positioning stickers for 
connecting the next pattern do not easily fit in the 
embroidering area, follow the on-screen instructions 
that appear after step 

m

 on page 17 in order to move 

the positioning stickers.
For an example, the on-screen instruction appears 
when you use the embroidery frame with a size of 10 
cm × 10 cm (4 inches × 4 inches) to connect patterns as 
shown below.

a

Pattern1.pes

b

Pattern2.pes

b

a

c