Select PS-9000, which is to be set up, and ; then click [Next].; Specify the IP address.- Page 20

 19

4

Select PS-9000, which is to be set up, and 
then click [Next].

• If the product is not displayed in the 

list, click [Search].

• Alternatively, you can type in the 

Ethernet address of the product that you 
want to set up.

• If you want to reset the product to its 

factory default settings, click [Initialize] 
and follow the instructions.

5

Specify the IP address.

• If “Assign an IP address” is selected 

(recommended)

→

In the following dialog box that 
appears, type in the IP address, 
subnet mask and default gateway. 
Consult your network administrator 
for the appropriate settings.

• If “Obtain an IP address automatically” 

is selected

→

In an environment with a DHCP/
BOOTP server, the IP address of PS-
9000 is automatically assigned.

Caution

●

After setup, the IP address may 
change when the unit is turned off, 
then turned on again. In that case, the 
PS-9000 must be set again and the 
printing software must be reinstalled.