AC Adaptor; GETTING STARTED- Page 16

14

Power Supply

GETTING STARTED

AC Adaptor

Insert the plug on the AC adaptor cord into the connector marked DC IN 9-9.5V 
on the P-touch.

Insert the AC adaptor plug into a standard electrical outlet.

1

2

• Turn the P-touch off before disconnecting the AC adaptor.
• Disconnect the AC adaptor from the P-touch and electrical outlet when you do not intend to 

use the P-touch for an extended period.

• Do not pull or bend the AC adaptor cord.
• Use only the AC adaptor (Model H1) designed exclusively for your P-touch. Failure to 

observe this may result in an accident or damage. Brother shall not assume any responsibility 
for any accident or damage resulting from not using the specified AC adaptor.

• Do not connect the AC adaptor to a non-standard electrical outlet. Failure to observe this may 

result in an accident or damage. Brother shall not assume any responsibility for any accident 
or damage resulting from not using a standard electrical outlet.

• When power is disconnected for more than two minutes, all text and format settings will be 

cleared. Any text files stored in the memory and clock settings will also be cleared.

For backup of memory and clock setting, when the AC adaptor is unplugged from the P-touch, 
please use AA-size alkaline batteries (LR6).