Manual Cutting; Adjusting the Label Length Accuracy; LABEL PRINTING- Page 66

LABEL PRINTING

64

Manual Cutting

When using Fabric Tapes or Strong Adhesive Tapes, set "On" for Manual Cutting 
before printing. After printing, remove the tape cassette from the machine and use 
scissors to cut the tape.

Press the 

 key to display the setup menu, select 

"Special Tape" using the   or   keys, and then 
press the 

 or   key.

Select the value by using the   or   keys.

Press the 

 or   key to apply the setting.

You can adjust the accuracy of the printed label length in increment of -5 to +5.

Press the 

 key. The current settings are 

displayed.

Select "Adjust Length." by using the   or   keys, 
and then set the value by using the   or   keys.

Press the 

 or   key to apply the setting.

Manual Cutting

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to its default setting ("Off").

Adjusting the Label Length Accuracy

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.