Error Messages- Page 77

1

2

3

4

5

6

7

8

9

75

z

 TRO

U

BLESHOOTING

Error Messages

When an error message appears on the display, follow the directions provided below.

Error Messages

Press any key to clear the error message. 

Message

Cause/Remedy

The installed batteries are getting weak.

• The batteries are installed with the negative and positive 

end in the wrong position, or other type batteries are mixed 
with alkaline batteries. Install eight AA-size alkaline 
batteries (LR6) in the correct position.

• The installed batteries are about to run out. Replace with 

new batteries or connect the AC adaptor before continuing.

An incompatible AC adaptor is connected. Use only the AC 
adaptor designed exclusively for your P-touch.

The tape cutter is closed when you try to print or feed tape. 
Turn the P-touch off and then on again before continuing.
When tape is tangled in the cutter, remove the tape.

There is no text, symbols or bar code data entered when you 
try to print or preview a label. Enter data before continuing.

There is no tape cassette installed when you try to print or 
preview a label, or feed tape. Install a tape cassette before 
continuing.

The tape cassette was changed while printing, etc. Make 
sure the correct tape cassette is inserted before printing.

There are already seven lines of text when you press the   
key. Limit the number of lines to seven.

There are more than five lines of text when you press the 

 or 

 key while using 18mm (3/4") tape. Limit the 

number of lines to five, or change the tape cassette for one 
with a larger tape cassette.