After printing; Removing the label backing; Press the cover release button and open - Page 92

91

C

rea

ti

n

g l

abe

ls

: 

Wind

ow

s ve

rs

ion

After printing

This section contains the procedures to remove the label backing from the printed label to remove.

Removing the label backing

When the backing of a printed label is not cut, 
use the included label stick.  For labels printed 
using the Half Cut option, peel back the 
backing from the cut line.

1

Press the cover release button and open 
the tape compartment cover.

2

Remove the label stick installed inside 
the PT-9500PC tape compartment cover.

3

Hold one end of the printed label with 
one hand and hold the label stick with 
the other hand.

4

Insert half of the printed label into the 
hole in the label stick with the printed 
side facing up.

5

Turn the label stick and quickly pull as 
shown in the illustration below.

→

The end of the label will come off of 
the backing slightly.

6

Completely remove the backing from the 
label and affix the label.