Cleaning the cutter; Press the cover release button and open ; the tape compartment cover.- Page 113

112

■

Cleaning tape

Use the TZ-CL6 cleaning tape with a tape 
width of 1 1/2" (36 mm) (sold separately) to 
clean the PT-9500PC easily.

1

Press the cover release button and open 
the tape compartment cover.

2

Remove the tape cassette and install the 
cleaning tape.

3

Close the tape compartment cover.

4

Press the feed/cut button.

→

Cleaning will start.

5

Press the cover release button and open 
the tape compartment cover.
When the rollers stop, press the cover 
release button.

6

Remove the cleaning tape, reinstall the 
tape cassette, and then close the tape 
compartment cover.

Cleaning the cutter

If the printed labels are not ejected from the 
PT-9500PC correctly, clean the cutter for 
cutting the labels.

1

Turn off the PT-9500PC.

2

Press the cover release button and open 
the tape compartment cover.

3

Remove the tape cassette.

4

Use a cotton swab to clean the cutter.

Note

●

For further details on using the cleaning 
tape, refer to the instruction manual 
included with the cleaning tape.

Cutter blade

Cotton swab

Metal section