Horizontal movement commands; CR Carriage return; ESC $ Specify absolute horizontal position- Page 27

 27 

Horizontal movement commands 

CR Carriage 

return 

[ASCII] CR 

[Decimal] 13 

[Hexadecimal] 0D 

[Parameters] None 

[Description] 

・

Performs a line feed of the amount specified by a line feed command (ESC 0, ESC 2, 
ESC 3 and ESC A). 

・

If no line feed amount has been specified, it is automatically specified depending on the 
width of the tape. 

・

The next print position is the beginning of the next line. 

・

A line feed command immediately after a carriage return is ignored. 

ESC $  Specify absolute horizontal position 

[ASCII]  ESC    $ n1 n2 

[Decimal] 

27 36 n1 n2 

[Hexadecimal] 

1B 24 n1 n2 

[Parameters] 0

≤

n1

≤

255, 0

≤

n2

≤

255 

[Description] 

・

Specifies an absolute print position (in units of 1/60 inch) for the next data. 

・

An absolute print position specifies the horizontal print position from the left margin. 

・

The next character is printed at a position (n1 + 256 * n2) / 60 inch from the left margin. 

* 

However, since the printable length is 1 meter, an actual value greater than 2362/60 

inches will result in an error during printing