Vertical movement commands; LF Line feed; FF Page feed- Page 29

 29 

Vertical movement commands 

LF Line 

feed 

[ASCII] LF 

[Decimal] 10 

[Hexadecimal] 0A 

[Parameters] None 

[Description] 

・

Performs the same line feed operation as CR. 

・

A carriage return command immediately after a line feed is ignored. 

FF Page 

feed 

[ASCII] FF 

[Decimal] 12 

[Hexadecimal] 0C 

[Parameters] None 

[Description] 

・

Starts printing. 

・

Clears the text, image data and bar codes after printing. 

・

If the data does not fit within the printable height of the tape, the data is divided and 

printed onto multiple pages. 

・

If the length of the print data exceeds 1 meter, the LED lights up to indicate that an error 
has occurred. 

ESC J  Forward paper feed 

[ASCII] ESC  J 

n 

[Decimal] 

27  74  n 

[Hexadecimal] 

1B  4A  n 

[Parameters] 0

≤

n

≤

255 

[Description] 

・

Finishes input of the current line, then moves the vertical print position forward by n/180 
inch. 

・

If n is less than 24, the feed amount is 24/180 inch (approximately 0.34 cm).