For Windows- Page 36

STEP3 Reference

30

When printing via the USB 

cable, the printer repeatedly 

pauses and then continues 

printing.

• Is the printer set for sequential printing?

For Windows

®

 XP:

If so, set print mode to buffered printing. (Open the printer 

properties from [Control Panel] - [Printer and other hardware] -

[Printer and Faxes] and click [Printing Preferences...] button in 

the [General] tab. Click the [Other] tab and choose the option 

"After one page of data is received".)

For Windows Vista

®

:

If so, set print mode to buffered printing. (Open printer properties 

from [Control Panel] - [Hardware and Sound] - [Printers] and click 

[Printing Preferences...] button in the [General] tab. Click the 

[Other] tab and choose the option "After one page of data is 

received".)

For Windows

®

 7:

If so, set print mode to buffered printing. (Open printer properties 
from 

 - [Devices and Printers], right-clicking the printer whose 

settings are to be changed, and selecting [Printing preferences]. 
Choose the option "After one page of data is received".)

• An alternative solution is to disconnect the LAN cable until USB 

printing is completed.

An error occurred when the roll 

cannot be fed to the beginning 

of the label.

• The procedure for feeding to the beginning of the label is 

different for die cut labels and continuous length label. See  

"Setting the RD Roll" on page 12.

• When using die cut labels with a length of 6" (152.4mm) inches 

or more, an error may occur if the TD-4000/4100N cannot 

detect the beginning of the label after the first time that the roll 

is fed. To clear the error, press the Feed button again.

Problem

Solution