Connect a barcode reader to the printer.; Print a label; Changing the basic settings- Page 7

7

Advanced operation

Specify the number of labels to be printed.

Refer to "Entering numbers" on P.8 and scan the barcodes to 

specify the number of labels to be printed in the 3-digit format.

Example: To print 5 labels

005

Scan the "Begin printing" barcode below.

In the example, labels 1234567890 to 1234567894 are 

printed.

Labels are counted up one at a time as each label is printed.

The number of labels printed is retained by the printer even when 

the power is turned OFF.

To reset the counter, scan the following "Initialize template data" 

barcode.

^ID

4.

5.

•

•

•

Click [Transfer] to transfer the label data to the printer. 

Connect a barcode reader to the printer.

Refer to "Connecting a barcode reader" on P.7 for more 
details.

Print a label

Scan the "P-touch template command (Initialize + begin 

specifying settings)" barcode below. 

"Find the relevant "Key Assign" numbers on P.9, and scan."

Example: If the "Key Assign" number is 6.

Select template

^TS006

 Scan the "Number of copies for numbered (sequential) 

printing" command.

^NN

2.

3.

4.

1.

2.

„

3.

Supplement

 Connecting a barcode reader

Set the barcode reader with no prefi x or suffi x.

Settable functions differ depending on the type of barcode reader. 

For serial connection (RS-232C) only. 

Execute that the communication settings of this printer and 

the barcode reader match. 

For more details on the communication settings for this 

printer, refer to "Setting up RS-232C communication 

(communication with a barcode reader)".

Connect a barcode reader.

z

1.

2.

3.

 Setting up barcode printing

Printing can be setup or specifi ed on the barcode reader.

Changing the basic settings

Scan the "P-touch template command" barcode. Refer to 

"List of barcodes for specifying settings" on P.8.

From the "Basic settings" barcodes, scan the barcode for 

the specifi ed parameter.

Precautions when specifying the number of 
copies to be printed.

Scan the "P-touch template command" barcode. Refer to 

"List of barcodes for specifying settings" on P.8.

Scan "Number of copies" barcode. Refer to "List of barcodes 

for specifying settings" on P.8.

Scan the barcodes for number of copies to be triple digits. 

Refer to "List of barcodes for specifying settings" and 

"Entering numbers" on P.8.

Example:  7 [00][7] 15 [0][1][5]

z

„

1.

2.

Ú

1.

2.

3.