Keyless Access; Driver Door Key Lock Cylinder; Keys, Doors, and Windows- Page 19

2020 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13527524) - 2020 - CRC - 9/5/19

18

Keys, Doors, and Windows

Warning (Continued)

permanent injuries or even
death from heat stroke.
Always lock the vehicle
whenever leaving it.

.

Outsiders can easily enter
through an unlocked door
when you slow down or stop
the vehicle. Locking the
doors can help prevent this
from happening.

To lock/unlock the doors from the
outside:

.

Press

Q

or

K

on the Remote

Keyless Entry (RKE) transmitter.
See

Remote Keyless Entry

(RKE) System Operation

0

8

.

.

Use the key in the driver door.
The key lock cylinder is covered
with a cap.

To lock/unlock the doors from the
inside:

.

Press

Q

or

K

on the power door

lock switch.

.

Push down on the door lock
knob to lock a door.

.

Pull the door handle once to
unlock it. Pull the door handle
again to unlatch it.

Keyless Access

The RKE transmitter must be within
1 m (3 ft) of the liftgate or door
being opened. Press the button on
the door handle to open. See

Remote Keyless Entry (RKE)
System Operation

0

8

.

Driver Door Key Lock Cylinder
Access (In Case of Dead
Battery)

To access the driver door key lock
cylinder:

1. Pull the door handle to the

open position and hold it open
until cap removal is complete.

2. Insert the key into the slot at

the bottom of the cap and lift
the key upward.

3. Move the cap rearward and

remove.

Detailed Information for 2020 Buick enclave Owner Manual

Lists of information found in 2020 Buick enclave Owner Manual - Page 19

  • 1. Pull the door handle to the open position and hold it open until cap removal is complete.
  • 2. Insert the key into the slot at the bottom of the cap and lift the key upward.
  • 3. Move the cap rearward and remove.