Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13527524) - 2020 - CRC - 9/5/19
Driving and Operating
205
automatically disengage. See
Traction Control/Electronic Stability
Control
. If a collision alert
occurs when cruise control is
activated, cruise control is
disengaged. See
. When
road conditions allow you to safely
use it again, cruise control can be
turned back on.
Cruise control will disengage if
either TCS or StabiliTrak/Electronic
Stability Control (ESC) is turned off.
If the brakes are applied, cruise
control disengages.
5
:
Press to turn cruise control on
or off. A white indicator comes on in
the instrument cluster.
RES+ :
If there is a set speed in
memory, press the control up briefly
to resume to that speed or press
and hold to accelerate. If cruise
control is already engaged, use to
increase vehicle speed.
SET
−
:
Press the control down
briefly to set the speed and activate
cruise control. If cruise control is
already engaged, use to decrease
vehicle speed.
*
:
Press to disengage cruise
control without erasing the set
speed from memory.
The speedometer reading can be
displayed in either English or metric
units. See
or
The increment value used depends
on the units displayed.
Setting Cruise Control
If
5
is on when not in use, SET
−
or
RES+ could get pressed and go into
cruise when not desired. Keep
5
off when cruise is not being used.
1. Press
5
to turn the cruise
system on.
2. Get to the speed desired.
3. Press and release SET
−
. The
desired set speed briefly
appears in the instrument
cluster.
4. Take your foot off the
accelerator pedal.
The cruise control indicator on the
instrument cluster turns green after
the cruise control has been set to
the desired speed. See
or