Manually Recalling Memory; Seat Entry Memory; Seats and Restraints- Page 47

2020 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13527524) - 2020 - CRC - 9/5/19

46

Seats and Restraints

4. Immediately press and hold the

1 or 2 memory button matching
the above DIC welcome
message until two beeps
sound.

If too much time passes
between releasing SET and
pressing 1, the memory
position will not be saved and
two beeps will not sound.
Repeat Steps 3 and 4.

1 or 2 corresponds to the driver
number. See

Identifying Driver

Number

previously in this

section.

5. Repeat Steps 1

4 for a second

driver using 1 or 2.

To save the position for

B

and

Seat Exit Memory features, repeat
Steps 1

4 using

B

. This saves the

position for getting out of the
vehicle.

Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.

Manually Recalling Memory
Positions

Press and hold 1, 2, or

B

to recall

the previously saved memory
positions if you are driver 1 or 2
identified in the DIC welcome
message. RKE transmitters 3

8 will

not recall memory positions.

To stop Manual Memory recall
movement, release 1, 2, or

B

or

press any of the following controls:

.

Power seat

.

Memory SET

.

Power mirror, with the driver or
passenger side mirror selected

.

Power steering wheel,
if equipped

Seat Entry Memory

The vehicle identifies the number of
the current driver

s RKE transmitter

(1

8). See

Remote Keyless Entry

(RKE) System Operation

0

8

. If the

RKE transmitter is 1 or 2, and Seat
Entry Memory is enabled in vehicle
personalization, the positions saved
to the same memory button number

1 or 2 are automatically recalled
when the vehicle is turned on,
or turned from off to ACC/
ACCESSORY. RKE transmitters 3

8

will not provide automatic memory
recalls.

To turn Seat Entry Memory on or off,
see

Vehicle Personalization

Settings

previously in this section

and

Vehicle Personalization

0

138

.

The vehicle must be in P (Park) to
start Seat Entry Memory. Seat Entry
Memory recall will complete if the
vehicle is shifted out of P (Park)
prior to reaching the saved memory
position.

To stop Seat Entry Memory recall
movement, turn the vehicle off or
press any of the following controls:

.

Power seat

.

Memory SET, 1, 2, or

B

.

Power mirror, with the driver or
passenger side mirror selected

.

Power steering wheel,
if equipped

Detailed Information for 2020 Buick enclave Owner Manual

Lists of information found in 2020 Buick enclave Owner Manual - Page 47

  • 4. Immediately press and hold the 1 or 2 memory button matching the above DIC welcome message until two beeps sound.
  • 4. 1 or 2 corresponds to the driver number.
  • 5. Repeat Steps 1 – 4 for a second driver using 1 or 2.