How to Add Coolant to the Radiator- Page 223

yellow

blue     

5-19

7. Replace the 3800 Series II V6 engine cover shield.

A. Remove the oil fill tube, with cap attached, from

the valve cover.

B. Insert the catch tab on the cover shield under the

bracket on the engine.

C. Place the hole in the cover shield over the hole in

the valve cover. Install oil fill tube and cap by
twisting clockwise.

D. If you have the supercharged engine, install the

nut in the center of the cover shield.

8. Then fill the coolant recovery tank to the COLD

mark on the coolant recovery tank.

9. Put the cap back on the coolant recovery tank, but

leave the pressure cap off.

10. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fans.