You can be burned if you spill coolant on hot- Page 236

5-19

A. Clean the area around the engine oil fill tube and cap

before removing. Twist the oil fill tube, with cap
attached, counterclockwise and remove it.

B. If you have the supercharged engine, remove the nut

in the center of the cover shield.

C. Lift the engine cover shield at the front, slide the

catch tab out of the engine bracket and remove the
cover shield.

D. Put the oil fill tube, with cap attached, in the valve

cover oil fill hole until you’re ready to replace the
cover shield.

4. After the engine

cools, open the
coolant air 
bleed valve.

There is one bleed valve. It is located on the
thermostat housing.

5. Fill the radiator

with the proper
DEX

-

COOL

R

coolant mixture, up
to the base of the
filler neck. See
“Engine Coolant”
in the Index for
more information
about the proper
coolant mixture.