You can be burned if you spill coolant on hot- Page 238

5-21

10. Start the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the
engine cooling fans.

11. By this time, the coolant level inside the radiator

filler neck may be lower. If the level is lower, add
more of the proper DEX

-

COOL

R

 coolant mixture

through the filler neck until the level reaches the
base of the filler neck.

12. Then replace the pressure cap. At any time during

this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrow on the pressure cap lines up like this.

13. Check the coolant in the recovery tank. The level in

the coolant recovery tank should be at the HOT
mark when the engine is hot or at the COLD mark
when the engine is cold.