Memory Seat and Mirrors Personal Choice- Page 10

yellow

blue     

1-4

Memory Seat and Mirrors Personal Choice
Feature (Option)

The remote keyless entry transmitters can also be
programmed to move the driver’s seat and outside
mirrors to a set memory position when the transmitter’s
UNLOCK button is pressed.

To program the system:

1. Adjust the driver’s seat cushion to a comfortable

position. Adjust both outside mirrors to suit you. See
“Power Remote Control Mirror” in the Index.

2. Press the SET button on the driver’s door armrest.

You will hear one beep.

3. Within five seconds, press one of the two memory

buttons on the armrest. You will hear two beeps to
confirm that the mirror and the seat positions are
entered into memory.

4. Press the UNLOCK button on the appropriate

transmitter within five seconds. You will hear 
two beeps.

The second transmitter can be programmed to record 
a different seat and mirror position by following the
same steps.

If you prefer to program the exit seat position, which
moves the seat completely down and back, follow 
these steps:

1. Press the SET button on the driver’s door armrest.

You will hear one beep.

2. Press the EXIT button on the armrest. You will hear

one beep, but the seat will not move at this time.

3. Press the UNLOCK button on the appropriate

transmitter within five seconds. You will hear 
two beeps.

This personal choice feature will work only when the
vehicle is in PARK (P). A beep will sound inside the
vehicle when the UNLOCK button on the transmitter is
pressed to move the seat and mirrors.

To turn this feature off, press SET and then UNLOCK
within five seconds.