Front Turn Signal Lamps; Up Lamps: D; Taillamps/Rear Turn Signal/Back-Up- Page 267

yellow

blue     

6-35

2. Turn the vertical aiming screw (C) until the level

bubble (D) is lined up with zero.

Front Turn Signal Lamps

The turn signal bulb is located in the front fascia.

1. Remove the panel on the underside of the bulb assembly

by pulling the two fasteners that hold it in place.

2. Reach in to press the locking tab and twist the bulb

socket one

-

quarter of a turn counterclockwise and

pull the bulb out of the socket.

3. Replace the bulb, then reassemble by reversing Steps

1 and 2.

Taillamps/Rear Turn Signal/Back-Up
Lamps

Taillamps: A, B and C

Rear Turn Signal: A and C

Back

-

Up Lamps: D

The entire taillamp assembly must be removed to
change any of these bulbs.