Seat Recline; Lumbar Support Adjustment; Height Adjustment for Front Edge- Page 22

3.

Height Adjustment for Front Edge
of Seat Bottom

To adjust the front height of the
seat bottom, raise or lower the
front of the slide lifter switch.

4.

Seat Recline

To change the seatback angle, press
the front or rear side of the reclining
switch. Release the switch at the
desired position.

5.

Lumbar Support Adjustment

To increase the seat firmness, press
and hold the front part of the
switch to the desired position, then
release it.
Press the rear part of the switch to
decrease firmness.

Before making adjustments to the
driving position recommended by
Mazda

Before making adjustments, move the
steering wheel and seat to their default
positions.

How to move the steering wheel to its
default position

WARNING

Never adjust the steering wheel while
the vehicle is moving:

Adjusting the steering wheel while the
vehicle is moving is dangerous. Moving
it can very easily cause the driver to
abruptly turn to the left or right. This
can lead to loss of control or an
accident.

After adjusting the steering wheel
position, make sure it is securely
locked by trying to move it up and
down:

Driving with the steering wheel not
securely locked in position is
dangerous. If the steering wheel moves
unexpectedly while driving, you could
lose control of the steering resulting in
an accident.

Lower the lever, move the steering
wheel to the lowest position, and then
push it down and all the way back.

How to move a driver’s seat to its
default position

1. Slide the seat all the way back.
2. Lower the seat to its lowest height.
3. Lower the front edge of the seat

bottom to its lowest height.

4. Sit squarely in the seat and rest your

back against the seatback.

Essential Safety Equipment

Seats

2-6

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09