Manual Switching; To Operate the System; Switching to low beams- Page 238



When there is insufficient darkness
such as at dawn or dusk.



When the luggage compartment is
loaded with heavy objects or the rear
passenger seats are occupied.



When visibility is reduced due to a
vehicle in front of you spraying water
from its tires onto your windshield.

▼

To Operate the System

The HBC operates to switch the
headlights automatically between high
and low beams after the ignition is
switched ON and the headlight switch
is in the AUTO and low beam position.
The HBC determines that it is dark
based on the brightness of the
surrounding area. At the same time,
the HBC indicator light (green) in the
instrument cluster illuminates.
 

NOTE

Operation of the HBC function can be
disabled.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

▼

Manual Switching

Switching to low beams

Switch the headlight switch to the 
position, or press the high beam
control switch.
The HBC indicator light (green) turns
off.

1. High beam control switch
 
If the HBC is turned off using the high
beam control switch, press the high
beam control switch again to turn the
HBC back on.

Switching to high beams

Shift the lever to the high beam
position.
The HBC indicator light (green) turns
off and the headlight high-beam
indicator light is illuminated.

When Driving

i-ACTIVSENSE

4-92

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09