Route the jumper cables away from parts that will be moving:- Page 496

Route the jumper cables away from parts that will be moving:

Connecting a jumper cable near or to moving parts (cooling fans, belts) is
dangerous. The cable could get caught when the engine starts and cause serious
injury.

CAUTION

Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).

1. Move the booster vehicle so that its battery is as close as possible to your

vehicle's battery.

2. Make sure that the power such as for the headlights and air conditioner is turned

off.

3. Remove the battery cover.

4. Turn off the booster vehicle's engine and connect the jumper cables in the

following order.
Make sure that the jumper cables are securely connected so that they do not
disconnect due to engine vibrations.

1st lead

 Positive (+) terminal on the discharged battery
 Positive (+) terminal on booster vehicle's battery

2nd lead

 Negative (-) terminal on booster vehicle's battery

If Trouble Arises

Battery Runs Out

7-14

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09