System Warning Beep; Warning Beep; Lane Departure Warning Sound- Page 523



Engine coolant temperature increase



Engine system problem

▼

Blind Spot Monitoring (BSM)
System Warning Beep

*

The Blind Spot Monitoring (BSM)
warning beep operates when the turn
signal lever is operated to the side
where the Blind Spot Monitoring
(BSM) warning light is illuminated.

▼

Front Cross Traffic Alert (FCTA)
Warning Beep

*

The Front Cross Traffic Alert (FCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the front on the left
and right sides of the vehicle.

▼

Rear Cross Traffic Alert (RCTA)
Warning Beep

*

The Rear Cross Traffic Alert (RCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the rear on the left
and right sides of the vehicle.

▼

Lane Departure Warning Sound

*

While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a
warning sound.

NOTE

The volume of the Lane Departure
Warning System (LDWS) warning
sound can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

▼

Mazda Radar Cruise Control
(MRCC) System Warnings

*

The Mazda Radar Cruise Control
(MRCC) system warnings notify the
driver of system malfunctions and
cautions on use when required.

Check based on the beep sound.

Warning beep type

Notification content

The beep sounds 1
time while the Mazda
Radar Cruise Control
(MRCC) is operating

The vehicle speed is
slower than 25 km/h
(16 mph) and the
Mazda Radar Cruise
Control (MRCC) sys-
tem has been can-
celed.

The beep sounds in-
termittently while the
Mazda Radar Cruse
Control (MRCC) is op-
erating.

The distance between
your vehicle and the
vehicle ahead is too
close. Check the safety
of the surrounding
area and reduce vehi-
cle speed.

▼

Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
Warnings

*

The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) system warnings notify
the driver of system malfunctions and
cautions on use when required.
Check based on the beep sound.

Warning beep type

Notification content

The beep sounds 1
time while the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) is op-
erating

If a malfunction occurs
in the system, make
sure that the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) has
been canceled.

The beep sounds in-
termittently while the
Mazda Radar Cruise
Control with Stop &
Go function (MRCC
with Stop & Go func-
tion) is operating.

The distance between
your vehicle and the
vehicle ahead is too
close. Check the safety
of the surrounding
area and reduce vehi-
cle speed.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

7-41

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09