Make sure there are no seat belts or; foreign objects near or around the; Installation on rear outboard seats- Page 64

Make sure there are no seat belts or
foreign objects near or around the
ISOFIX/LATCH

*1

 child-restraint

system:

Not following the child-restraint system
manufacturer's instructions when
installing the child-restraint system is
dangerous. If seat belts or a foreign
object prevent the child-restraint
system from being securely attached to
the ISOFIX/LATCH

*1

 lower anchors

and the child-restraint system is
installed improperly, the child-restraint
system could move in a sudden stop or
collision causing serious injury or death
to the child or other occupants. When
installing the child-restraint system,
make sure there are no seat belts or
foreign objects near or around the
ISOFIX/LATCH

*1

 lower anchors.

Always follow the child-restraint
system manufacturer's instructions.

*

1 ISOFIX (Mexico)/LATCH (Except

Mexico)

Installation on rear outboard seats

1. First, adjust the front seat to allow

clearance between the
child-restraint system and the front
seat.
Refer to Adjusting the Driver's Seat
on page 2-4.
Refer to Adjusting the Front
Passenger's Seat on page 2-12.

2. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.

3. Remove the cover of the

child-restraint system's ISOFIX/
LATCH

*1

 lower anchors to verify the

locations of the ISOFIX/LATCH

*1

lower anchors.

1. Lower anchor
 

NOTE



The ISOFIX/LATCH

*1

 lower

anchors marking on the cover
indicates the position of the
ISOFIX/LATCH

*1

 lower anchors

for the attachment of a
child-restraint system.



Store the removed cover so that it
does not get lost.

4. Remove the head restraint.

However, when installing a backless
booster seat, always install the
vehicle head restraint to the seat
where the backless booster seat is
installed.
Refer to Head Restraints on page
2-16.

5. Secure the child-restraint system

using BOTH ISOFIX/LATCH

*1

 lower

anchors, following the
child-restraint system
manufacturer's instruction. Pull on
the child-restraint to be sure both
anchors are engaged.

Essential Safety Equipment

Child Restraint

2-48

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09