Fig. 4-47; Fig. 4-48- Page 96

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-26

(22) Press the two catches holding the idle gear 13 to the frame and then remove the idle gear

13.  Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in
the frame and then remove the roller by pulling it forwards.

Fig. 4-47

(23) Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the

springs release from the frame.

Fig. 4-48

Fixing unit frame

Idle gear 13

First eject roller

Fixing unit frame

Pinch spring

Eject pinch roller