Fig. 4-43; Fig. 4-44- Page 94

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-24

(16) Remove the heat roller cleaner complete with the cleaner spring from the fixing unit frame

by lifting it upwards until the spring releases from the frame.

(17) Remove the cleaner spring from the heat roller cleaner.

Fig. 4-43

NOTE:

• 

When re-assembling the heat roller cleaner complete with the cleaner spring onto the fixing
unit frame, ensure the direction of the roller is correct referring to the figure above.

• 

Ensure also that the spring is seated correctly in the locating channel and does not protrude
from either end.

(18) Remove the pressure roller from the fixing unit cover by gently levering the right hand side

upwards to release it from the bearing and then sliding it to the right to remove it.

(19) Remove the pressure roller cleaner complete with the cleaner spring from the fixing unit

cover by lifting it upwards until the spring releases from the cover.

(20) Remove the cleaner spring from the pressure roller cleaner.

Fig. 4-44

Cleaner spring

Heat roller cleaner

Fixing unit frame

Cleaner spring

Pressure roller cleaner

Fixing unit cover

Pressure roller

Heat roller cleaner

Cleaner spring

Pressure roller cleaner