Configuring NetWare 3 and NetWare 4 systems; Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using BRAdmin; Novell Printer Gateway- Page 70

NOVELL NETWARE PRINTING 6 - 6

YL4US_FAX2800MFC4800-FM5.5

4

Enter the name you wish the Printer Agent to be referred to by, 
and select Novell Printer Gateway for the Gateway type and 
click OK.

5

Select None for the printer Type, and Novell Port Handler for 
the Port Handler Type. Then click OK.

6

You must now specify the type of connection that you are going 
to use. There are four possible options. Select the LPR over IP 
option.

7

Enter the relevant details of the printer and Brother 
recommends typing 

Binary_P1

 for the printer name. Click 

finish and wait. Select the printer drivers for the client operating 
systems.

You are now ready to print.

Configuring NetWare 3 and NetWare 4 systems

Brother's BRAdmin application provides similar functionality to the 
NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 
4.1x or later). To use the BRAdmin application to configure a Brother 
print server under NetWare, make sure that you are logged in as 
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or 
later) and perform the appropriate steps as detailed in the following 
pages.

Configuring the Brother Print Server 
(Queue Server Mode in Bindery emulation mode) 
using BRAdmin

1

Make sure that you logged in as SUPERVISOR (NetWare 2.xx 
or 3.xx) or ADMIN (NetWare 4.xx or later).

2

Start BRAdmin.

3

One or more print servers will appear in the list (the default node 

You must install the Novell NetWare Client 32 if you wish to 
create queue information on your NetWare servers by 
BRAdmin.