Network key; Configuring your machine for a wireless network; Using the Setup Wizard from the control panel- Page 27

Configuring your machine for a wireless network

20

3

Network key

3

There are some rules for each security method:

„

Open system/Shared key with WEP

This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format.

„

WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is more than 7 and less than 64 characters in length.

Configuring your machine for a wireless network

3

There are three methods to configure your wireless network machine; by using the machine control panel 
(recommended), using the SecureEasySetup™ software and using the automatic installer application on the 
CD-ROM.

Using the Setup Wizard from the control panel

3

You can configure your print server by using the 

Setup Wizard

 function. This is located in the 

LAN

 menu 

on the machine’s control panel. See to the steps below for further information. 

a

Press 

Menu

.

b

Press 

a

 or 

b

 to select 

LAN

.

Press 

OK

.

c

Press 

a

 or 

b

 to select 

Network I/F

.

Press 

OK

.

d

Press 

a

 or 

b

 to select 

WLAN

.

Press 

OK

. The wireless network interface will be activated.

e

Press 

a

 or 

b

 to select 

Setup WLAN

.

Press 

OK

.

f

Press 

a

 or 

b

 to select 

Setup Wizard

.

Press 

OK

.

g

Start to search for a SSID around the machine.

64 (40) bit ASCII:

Uses 5 text characters.e.g. “WLLAN” (this is case sensitive).

64 (40) bit hexadecimal:

Uses 10 digits of hexadecimal data.e.g. “71f2234aba”

128 (104) bit ASCII:

Uses 13 text characters.e.g. “Wirelesscomms” (this is case 
sensitive)

128 (104) bit hexadecimal:

Uses 26 digits of hexadecimal datae.g. 
“71f2234ab56cd709e5412aa2ba”