Setup Misc.; Ethernet; Printing the Network Configuration Page- Page 24

Front Panel Setup

3 - 7

3

Setup Misc.

Ethernet

Ethernet link mode. Auto allows the print/scan server to operate in 100BaseTX full or half duplex, or in 
10BaseT full or half duplex mode by auto negotiation.

100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half 
Duplex (10B-HD) fix the print/scan server link mode. This change is valid after the print/scan server has been 
reset (default is 

Auto

).

Note

If you incorrectly set this value, you may not be able to communicate with your print/scan server.

1

Press Menu/Set, 5, 2, 1.

2

Press 

▲

 or 

▼

 to select 

Auto/100B-FD/100B-HD/10B-FD/10B-HD

.

3

Press Menu/Set.

4

Press Stop/Exit.

Printing the Network Configuration Page

Note

Node name: Node name appears in the Network Configuration Page. The default Node name is 
"

BRN_xxxxxx

" ("

xxxxxx

" is the last six digits of Ethernet address.).

The Network Configuration Page prints a report listing all the current network configuration including the 
network print/scan server settings. 

1

Press Reports.

2

Press 

▲

 or 

▼

 to select 

Network Config.

3

Press Menu/Set.