Windows® 2000/XP Printing (Printer Driver already installed); Windows NT®4.0 Printing; Add Port- Page 30

TCP/IP PRINTING 2 - 4

Windows

®

 2000/XP Printing 

(Printer Driver already installed)

If you have already installed the printer driver and wish to configure 
it for network printing, follow these steps:

1

Select the printer driver you wish to configure.

2

Select 

File

 and then choose 

Properties

.

3

Click the 

Ports

 tab of the driver and click 

Add Port

.

4

Select the port that you wish to use. Typically this would be 

Standard TCP/IP Port

. Then click the 

New Port...

 button.

5

The 

standard TCP/IP Port Wizard

 will start. Follow the Step 6 

to 10 in the 

Standard TCP/IP Port Printing

 section.

Windows NT

®

4.0 Printing

If you did not install the TCP/IP protocol during the installation of your 
Windows NT

®

4.0 system (either workstation or server) follow these 

steps. If you have already installed the TCP/IP protocol, proceed to 
the next section.

1

Go to the 

Start

 button, choose 

Settings

, and then select 

Control Panel

.

2

Run the 

Network

 applet by double clicking the 

Network

 icon 

and then click on the 

Protocols

 tab.

3

Select 

Add

, and double click on the 

TCP/IP Protocol

.

4

Insert the requested disk(s), or CD-ROM, to copy the required files.

5

Click the 

Close

 button. The Windows NT

®

4.0 system will review 

protocol bindings and then you will see the 

TCP/IP Properties

dialog.