10 Front Panel Setup Menu; LAN Main Setup Menu; Front Panel Setup Menu- Page 90

FRONT PANEL SETUP MENU 10 - 1

10

10

Front Panel Setup Menu

LAN Main Setup Menu

With the Network (LAN) Board (NC-9100h Print/Fax Server) 
installed, you can connect your machine into the network to use the 
Internet FAX, Network Scanner and Network Printer.

1

Install the Network (LAN) Board (NC-9100h). For more 
information, see Chapter 23 of User’s Guide included with the 
machine.

2

Set up the machine for your Network using the control panel.

The LAN menu selections allow you to setup the Brother DCP/MFC 
for your network and Internet Fax configuration. Press 

Menu

 then 

press the appropriate number for LAN, based on the selections 
displayed on your machine. After you have displayed the LAN Main 
Setup menu, there are seven main selections: 

Setup TCP/IP

, 

Setup 

Internet

, 

Setup Mail RX

, 

Setup Mail TX

, 

Setup Relay

, 

Setup Misc 

and

 Scan to E-mail

. Proceed to the menu selection you wish to 

configure.

Please note that once you have specified a valid IP address for the 
machine, it is also possible to configure many aspects of the DCP/
MFC using your favorite web browser. For added flexibility, the DCP/
MFC is supplied with the BRAdmin Professional Windows

®

 software, 

which also can be used to configure many aspects of the NC-9100h.

You can also set up using BRAdmin, Web BRAdmin software 
and so on. For more information, 

see Chapter 11

 or visit at: 

http://solutions.brother.com.