Configuring NetWare 3 and NetWare 4 systems; Creating a Network Print Server (Bindery Queue Server) using BRAdmin Professional utility; Novell Port Handler - Page 63

6 - 6 NOVELL NETWARE PRINTING

5

Select 

None

 for the printer Type, and 

Novell Port Handler 

for 

the Port Handler Type. Then click 

OK

.

6

You must now specify the type of connection that you are going 
to use. There are four possible options. Select the 

LPR over IP

option.

7

Enter the relevant details of the printer and Brother 
recommends typing 

Binary_P1

 for the printer name. Click 

finish

 and wait. Select the printer drivers for the client operating 

systems.

You are now ready to print.

Configuring NetWare 3 and NetWare 4 systems

Brother's BRAdmin Professional utility provides similar functionality 
to the NetWare PCONSOLE utility (or the NWADMIN utility in 
NetWare 4.1x or later). To use the BRAdmin Professional utility to 
create a Brother Print server under NetWare, make sure that you are 
logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN 
(NetWare 4.1x or later) and perform the appropriate steps as detailed 
in the following pages.

Creating a Network Print Server (Bindery Queue 
Server) using BRAdmin Professional utility

1

Make sure that you logged in as SUPERVISOR (NetWare 2.xx 
or 3.xx) or ADMIN (NetWare 4.xx or later).

2

Start BRAdmin Professional utility.

You must install the Novell NetWare Client 32 if you wish to 
create queue information on your NetWare servers by 
BRAdmin Professional utility.