The P-touch labeler ; stops while printing a ; The label is not cut - Page 80

TROUBLESHOOTING

73

What to do when...

The P-touch labeler 
stops while printing a 
label.

• Replace the tape cassette if striped tape is visible, as this 

indicates that you have reached the end of the tape.

• Replace all batteries or connect the AC adapter directly to 

the P-touch labeler.

The label is not cut 
automatically.

• Check that the Cut Option setting is not set to Chain or No 

Cut, as the tape will not be fed after printing the label. 
Alternatively, hold down the 

Shift

 key and press the 

Preview

 key to feed and cut the tape.

Label files saved 
previously are now 
empty.

All files stored in the internal memory are deleted if the 
batteries are weak or the AC adapter was disconnected.

Problem

Solution