Printing the Printer Settings; How to print the Printer Settings Page; Network Configuration- Page 19

Configuring your network printer

14

2

a

Type 

http://printer_ip_address/

 into your browser. (Where 

printer_ip_address

 is the IP 

address or the print server name)

„

For example:

http://192.168.1.2/ (if the printer’s IP address is 192.168.1.2.)

Note

If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter 
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter 
the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The 
NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as 
“BRNxxxxxxxxxxxx” where “

xxxxxxxxxxxx

” is the Ethernet address.

b

Click 

Network Configuration

.

c

Enter a user name and a password. The User Name is 

admin

 and the default Password is 

access

.

d

Click 

OK

.

e

You can now change the print server settings.

Printing the Printer Settings

2

The Printer Settings Page prints a report listing the network settings. You can print the Printer Settings Page 
using the Feed/Cut button of the printer.

Note

The node name and Ethernet address in addition to its detailed information are printed in the printer 
settings list.
<Node name> BRNxxxxxxxxxxxx
<Ethernet Address> xxxxxxxxxxxx
The default Node name of the network card in the printer is “BRNxxxxxxxxxxxx” where “xxxxxxxxxxxx” is 
the Ethernet address.

How to print the Printer Settings Page

2

a

Make sure that the HG or TZ tape cassette is set and the tape compartment cover is closed.
To print the Printer Settings Page, we recommend to use the tape wider than 1” (24mm).

b

Turn on the printer.

c

Press and hold the Feed/Cut button.

Note

• To reset network setting and turn APIPA ON 

Press the Power button to switch the machine OFF. Then, hold down the Power button for two seconds. 
Continue holding down the ON/OFF button, and press the Feed/Cut button twice. All the network settings 
will be reset.

• To reset network setting and turn APIPA OFF 

Press the Power button to switch the machine OFF. Then, hold down the Power button for two seconds. 
Continue holding down the ON/OFF button, and press the Feed/Cut button four times. All the network 
settings will be reset.