Arranging Embroidery Designs; Note: ; Transferring Embroidery Designs to - Page 54

52

Arranging Embroidery Designs

Transferring Embroidery Designs to 
Machines

The procedures for transferring the created embroidery pattern to an embroidery machine differ depending on 
your embroidery machine model. For details, refer to the Operation Manual provided with your embroidery 
machine.

Transferring to a machine 
by using an original card

Designs can be transferred to 
an embroidery machine 
equipped with a card slot.

c

For details on writing multiple embroidery 
designs, refer to “Writing Multiple 
Embroidery Files to an Original Card” on 
page 72.

1.

Insert an original card into the USB Card 
Writer Module.

2.

Click , 

then 

, 

then .

3.

When the following message appears, click 

OK

.



Data transfer begins. The following 
message appears while the data is being 
transferred.

4.

After the data has been transferred, the 
following message appears, indicating that the 
transfer is finished. Click 

OK

.

a

Note: 

• Be sure that the hoop size of the design 

does not exceed the hoop that will be used 
on the embroidering machine.

• When writing to an original card that 

already contains data, all data on the card 
will be deleted. Before writing to a card, 
save all necessary data to a hard disk or 
other media, and check that no necessary 
data remains on the card.

c

“From an embroidery card” on 
page 50

XE8656-001.book  Page 52  Thursday, June 30, 2011  2:56 PM