Arranging Embroidery Designs; Note: ; Transferring to a machine - Page 55

53

Arranging Embroidery Designs

Arra

ngin

g Embro

ide
ry Des

ign
s

Transferring to a machine 
by using USB media

Designs can be transferred to 
an embroidery machine 
compatible with the USB Host 
function.

1.

Plug the USB media into the computer.

2.

Click 

, then 

, 

then 

, then 

.



Data transfer begins.

3.

After the data has been transferred, the 
message “Finished outputting data.” appears, 
indicating that the transfer is finished. Click 

OK

, and then remove the USB media.

Transferring directly to a 
machine’s memory

Designs can be transferred to 
embroidery machines that can 
be connected to a computer 
using a USB cable.

1.

Connect the embroidery machine to the 
computer. 

2.

Click 

, then 

, 

then 

, then 

.



Data transfer begins.

3.

After the data has been transferred, the 
message “Finished outputting data.” appears, 
indicating that the transfer is finished. Click 

OK

.

a

Note: 

If there is already a file with the same name 
at the destination, the following dialog box 
appears. Select whether to overwrite the 
existing file, to stop copying or to copy the 
file using a different name.

b

Memo:

If multiple USB media are connected, specify 
where the data is to be transferred in the area 
shown below.

b

Memo:

• For details on transferring designs with this 

method, refer to the Operation Manual 
provided with your embroidery machine.

• If multiple machines are connected, specify 

where the data is to be transferred in the 
area shown below.

XE8656-001.book  Page 53  Thursday, June 30, 2011  2:56 PM