Changing the initial needle ; Turn off the sewing machine.; Hold down the “+” side of - Page 13

11

1

Changing the initial needle 
position

Normally, the straight stitch (left needle position) is 
automatically selected when the sewing machine is 
turned on. The machine can be set so that the 
straight stitch (center needle position) is 
automatically selected when it is turned on.

a

Turn off the sewing machine.

b

Hold down the “+” side of 

 (stitch selection 

key) on the left and turn on the sewing 
machine.

After turning on the sewing machine, release 

the “+” side of 

 (stitch selection key).

X

The initial needle position changes to 
the center needle position.

Memo

• The specified initial needle position is 

maintained even after the machine is turned 
off.

• Perform the same operation to change the 

initial needle position to the left needle 
position.

Cancelling the operation beep

When the sewing machine is purchased, it is set to 
beep each time a key is pressed. This setting can be 
changed so that the machine does not beep.

a

Turn off the sewing machine.

b

Hold down the “–” side of 

 (stitch width 

adjustment key) and turn on the sewing 
machine.

After turning on the sewing machine, release 
the “-” side of 

 (stitch width adjustment 

key).

X

The machine is now set so that it will 
not beep.