Pull down the buttonhole lever as far as ; Gently hold the end of the upper thread in ; your left hand, and then start sewing.- Page 50

VARIOUS STITCHES 

—————————————————————————————————————————————————

48

• When lowering the presser foot, do not push 

in the front of the presser foot, otherwise the 
buttonhole will not be sewn with the correct 
size.

a

Do not reduce the gap.

f

Pull down the buttonhole lever as far as 
possible.

a

Buttonhole lever

The buttonhole lever is positioned behind the 
bracket on the buttonhole foot.

a

Buttonhole lever

b

Bracket

g

Gently hold the end of the upper thread in 
your left hand, and then start sewing.

X

Once sewing is completed, the 
machine automatically sews 
reinforcement stitches, then stops.

h

Raise the presser foot lever, remove the 
fabric, and cut the thread.

i

Raise the buttonhole lever to its original 
position. 

j

Insert a pin at the end of the buttonhole 
stitching to prevent the stitching from being 
cut, and then use a seam ripper to cut towards 
the pin and open the buttonhole.

a

Seam ripper

b

Pin

For keyhole buttonholes, use a commercial 
eyelet punch to make a hole in the rounded 
end of the buttonhole, and then use the seam 
ripper to cut open the buttonhole.

a

Eyelet punch

• When using the eyelet punch, place thick 

paper or some other protective sheet under 
the fabric before punching the hole in the 
fabric.

Memo

●

Before sewing buttonholes, check the stitch 
length and width by sewing a trial 
buttonhole on a scrap piece of fabric.

●

When opening the buttonhole with the seam 
ripper, do not place your hands in the cutting 
path, otherwise injuries may result if the seam 
ripper slips. Do not use the seam ripper in any 
other way than how it is intended.

1

2

1

CAUTION