Do not ; For a longer service life:- Page 3

1

4

Always

 keep your work area clear:

• Never operate the machine with any air openings blocked. Keep ventilation openings of the 

sewing machine and foot control free from the build up of lint, dust, and loose cloth.

•

Do not

 store objects on the foot controller. 

•

Do not 

use extension cords. Plug the machine directly into the electrical outlet.

•

Never

 drop or insert 

any

 object into 

any

 opening.

•

Do not

 operate where aerosol (spray) products are being used or where oxygen is being 

administered. 

•

Do not

 use the machine near a heat source, such as a stove or iron; otherwise, the machine, 

power cord or garment being sewn may ignite, resulting in fire or an electric shock.

•

Do not

 place this sewing machine on an unstable surface, such as an unsteady or slanted table, 

otherwise the sewing machine may fall, resulting in injuries.

5

Special care is required when sewing:

•

Always

 pay close attention to the needle. Do not use bent or damaged needles.

• Keep fingers away from 

all

 moving parts. Special care is required around the machine needle.

• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments 

in the needle area.

•

Do not

 use a damaged or incorrect needle plate, as it could cause the needle to break.

•

Do not

 push or pull the fabric when sewing, and follow careful instruction when freehand stitching 

so that you do not deflect the needle and cause it to break.

6

This machine is 

not

 a toy:

• Your close attention is necessary when the machine is used by or near children.

• The plastic bag that this sewing machine was supplied in should be kept out of the reach of 

children or disposed of. Never allow children to play with the bag due to the danger of 
suffocation.

•

Do not

 use outdoors.

7

For a longer service life:

• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store 

the machine near a space heater, iron, halogen lamp, or other hot objects.

• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders 

can damage the case and machine, and should never be used.

• Always consult the operation manual when replacing or installing any assemblies, the presser feet, 

needle, or other parts to assure correct installation.