Hold the needle with your left hand, and then ; use a screwdriver to turn the needle clamp ; screw counterclockwise to remove the - Page 25

23

1

d

Hold the needle with your left hand, and then 
use a screwdriver to turn the needle clamp 
screw counterclockwise to remove the 
needle.

Note

●

The needle can be removed by simply 
loosening the needle clamp screw about 
one turn. (If the needle clamp screw is 
loosened too much, the needle clamp 
(which holds the needle) may fall off. 
Therefore, do not loosen the needle clamp 
screw too much.)

a

Screwdriver

b

Needle clamp screw

• Do not apply strong force when loosening or 

tightening the needle clamp screw, 
otherwise certain parts of the sewing 
machine may be damaged.

e

With the flat side of the needle toward the 
rear of the machine, insert the needle until it 
touches the needle stopper.

a

Needle stopper

f

While holding the needle with your left hand, 
use the screwdriver to tighten the needle 
clamp screw by turning it clockwise.

Install the twin needle in the same way.

●

Be sure to insert the needle until it touches 
the needle stopper and securely tighten the 
needle clamp screw with the screwdriver, 
otherwise the needle may break or damage 
may result.

CAUTION