Manual Park Release; Driving and Operating- Page 208

2018 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

10999311) - 2018 - crc - 11/20/17

Driving and Operating

207

If the vehicle cannot shift from
P (Park), a Driver Information
Center (DIC) message will be
displayed. See your dealer for
service.

Manual Park Release

{

Warning

The transmission will be placed in
N (Neutral) when the manual park
release is pulled. The vehicle can
roll and you or others could be
injured. Ensure the vehicle is on
level ground.

Caution

The manual park release is not
intended to be used for towing.
Damage may result from using
the manual park release in this
way. The repairs would not be
covered by the vehicle warranty.

This vehicle includes a manual park
release that can be used to shift the
vehicle into N (Neutral) when the
engine is not running.

Pulling the manual park release
while the vehicle is on or turning the
ignition on while the manual park
release is pulled, will result in a
Service Transmission message
being displayed.

To place the vehicle in N (Neutral)
using the manual park release:

1. Ensure the vehicle is on level

ground and set the parking
brake. Release the brake
pedal.

2. Turn the vehicle off.

3. Use a flat-bladed tool to

remove the fastener located in
the lower front corner of the
interior trim panel on the center
console to the right of the
accelerator pedal.

4. Use a flat-bladed tool to pry off

the panel.

5. Ensure more than one minute

has elapsed since Step 2.
Apply the brake pedal.

Detailed Information for 2018 Buick enclave Owner Manual

Lists of information found in 2018 Buick enclave Owner Manual - Page 208

  • 1. Ensure the vehicle is on level ground and set the parking brake.
  • 2. Turn the vehicle off.
  • 3. Use a flat-bladed tool to remove the fastener located in the lower front corner of the interior trim panel on the center console to the right of the accelerator pedal.
  • 4. Use a flat-bladed tool to pry off the panel.
  • 5. Ensure more than one minute has elapsed since Step 2.