“Rolling Code” Programming (If Equipped); Erasing Channels; Accessories- Page 117

yellow

blue     

2-60

“Rolling Code” Programming (If Equipped)

If you have not previously programmed the hand

-

held

transmitter to the Universal Transmitter, see
“Programming the Universal Transmitter” listed
previously. If you have completed this programming
already, you now need to train the garage door opener
motor head unit to recognize the Universal Transmitter.
Refer to your garage door opener owner’s manual for
the proper transmitter training procedure for your garage
door opener brand.

1. Find the training button on the garage door opener

motor head unit. The exact location and color of the
button may vary by garage door opener brand. If you
have difficulty finding the training button, refer to
your garage door opener owner’s manual.

2. Press the training button on the garage door opener

motor head unit.

Note: Following this step, you have 30 seconds to
start Step 3.

3. Return to the Universal Transmitter in your 

vehicle and firmly press and release the Universal
Transmitter button you have already programmed 
for two to three seconds. 

Press and release the button again (you may need to
do this step up to three times) to make sure that the
Universal Transmitter has been trained to the garage
door opener motor head unit. Check that the training
was successful.

The garage door opener should now recognize the
Universal Transmitter. You may either use the Universal
Transmitter or the hand

-

held transmitter to open the

garage door.

If after following these instructions, you still have
problems training the garage door opener, contact the
Universal Transmitter manufacturer at 1

-

800

-

355

-

3515.

Erasing Channels

To erase all three programmed channels, hold down the
two outside buttons until the indicator light begins to
flash (after 20 seconds). Release both buttons.

Accessories

Accessories for the Universal Transmitter are available
from the manufacturer of the unit. If you would like
additional information, please call 1

-

800

-

355

-

3515.