Rear Turn Signals, Stoplamps and Taillamps- Page 299

yellow

blue     

6-40

Rear Turn Signals, Stoplamps and Taillamps

1. Open the trunk. Turn the screws located just inside

of the trunk counterclockwise and remove.

2. Remove the plastic trim piece from the trunk.

3. Pull the carpet away from the rear area to access the

turn signal bulb assembly.

4. Using a 10 mm wrench or a socket, loosen and

remove the bolts that hold the assembly in place.

5. Pull out the bulb assembly.

6. Turn the bulb socket

one

-

quarter turn

counterclockwise, while
pressing it firmly.

7. Pull the bulb socket straight out of the assembly.

8. Remove the old bulb by pulling it straight out.

9. Replace with a new bulb by pushing the bulb

straight into the socket until the bulb clicks 
into place.

10. Turn the bulb socket one

-

quarter turn into the

assembly to lock it back into place.

11. Reverse steps 1 through 5 to reinstall the 

bulb assembly.