Slide Operation; Jam-safe Moonroof- Page 132

Slide Operation

To fully open automatically,
momentarily press the tilt/slide switch
in the backward direction.
To fully close automatically,
momentarily press the tilt/slide switch
in the forward direction.
To stop sliding partway, press the tilt/
slide switch.
When the moonroof is already tilted
open and you want to slide it open,
first close the moonroof and then do a
slide operation.

1. Open
2. Close

NOTE

If the moonroof does not operate
normally, do the following procedure:
1. Switch the ignition ON.
2. Press the tilt switch, to partially tilt

open the rear of the moonroof.

3. Repeat Step 2. The rear of the

moonroof tilts open to the fully
open position, then closes a little.

 
If the reset procedure is performed
while the moonroof is in the slide
position (partially open) it will close
before the rear tilt opens.

▼

Jam-safe Moonroof

If a person's hands, head or an object
blocks the moonroof while it is closing,
the moonroof will stop and move in
the open direction.

NOTE



The jam-safe function may operate
under the following conditions:



A strong impact is detected while
the moonroof is closing
automatically.



The moonroof is closing
automatically during very low
temperatures.



In the event the jam-safe function
activates and the moonroof cannot
be closed automatically, press the
tilt/slide switch and the moonroof
will close.



The jam-safe moonroof function
does not operate until the system has
been reset.

▼

Sunshade

The sunshade can be opened and
closed by hand.
 
The sunshade opens at the same time
as the moonroof slides open, but it
must be closed by hand.

1. Sunshade

Before Driving

Windows

3-44

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09