Indication on multi-information; Indication on active driving dis-; Changing the Set Vehicle Speed- Page 281

Distance-between-vehicles

guideline

(at 80 km/h (50 mph) vehicle

speed)

Indication on multi-information

display

Indication on active driving dis-

play

*1

Extremely short (about 25 m (82
ft))

*

1

Displays a pop-up image in the active driving display only when the driver operates the switch.

NOTE



The distance-between-vehicles differs depending on the vehicle speed, and the
slower the vehicle speed, the shorter the distance.



When the ignition is switched to ACC or OFF and then the engine is started again,
the system automatically sets the distance-between-vehicles to the previous
setting.

Changing the Set Vehicle Speed

(To accelerate/decelerate using the
RES switch)

When the RES switch is pressed up
(SET+), the vehicle accelerates and
when the RES switch is pressed down
(SET-), it decelerates.



Press and release immediately: 1
km/h (1 mph)



Press and hold: 10 km/h (5 mph)

(To increase speed using accelerator
pedal)

Depress the accelerator pedal and
press the RES switch up (SET+) or
down (SET-) at the desired speed. If
the switch is not operated, the system
returns to the set speed after you
release your foot from the accelerator
pedal.

NOTE



The warnings and brake control do
not operate while the accelerator
pedal is depressed.



The setting speed can be changed by
operating the RES switch up (SET+)
or down (SET-) during stop hold
control.

Canceling the system

When the following operations are
performed, the MRCC with Stop & Go
function system is canceled, and the
MRCC with Stop & Go function set
indication (green) switches to the
MRCC with Stop & Go function
standby indication (white) at the same
time.



The CANCEL switch is pressed.



The brake pedal is depressed.



The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.

 
Under the following conditions, the
MRCC with Stop & Go function cancel
indication is displayed in the
multi-information display and a single
beep sound is heard.



The DSC has operated.

When Driving

i-ACTIVSENSE

4-135

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09