Windshield Defrosting and; Set the temperature control to the hot; or warm position when defogging- Page 399



When selecting heat, the system will
restrict airflow until the engine has
warmed to prevent cold air from
blowing out of the vents.

▼

Windshield Defrosting and
Defogging

Press the windshield defroster switch.
In this position, the outside air position
is automatically selected, and the air
conditioner automatically turns on.
The air conditioner will directly
dehumidify the air to the front
windshield and side windows on page
5-4.
Airflow amount will be increased.

WARNING

Set the temperature control to the hot
or warm position when defogging
(

 position):

Using the 

 position with the

temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious accident.

NOTE



Fogging on the windows clears up
more easily while the air conditioner
is on, but they will fog up more easily
if the air conditioner is turned off.



Be careful that the windows do not
fog up when doing any of the
following:



Switching to recirculate mode



Turning off the air conditioner



Use the temperature control dial to
increase the air flow temperature
and defog the windshield more
quickly.

▼

Sunlight/Temperature Sensor

The climate control system measures
inside and outside temperatures,
humidity and sunlight using the
sunlight/temperature sensor. It sets
temperatures inside the cabin
accordingly.

CAUTION

Do not obstruct both sensors,
otherwise the climate control system
will not operate properly.

Sunlight sensor

1. Sunlight sensor

Interior temperature sensor

1. Interior temperature sensor

Interior Features

Climate Control System

5-13

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09