Using Automatic Locking Mode; Always attach the tether strap to the; correct tether anchor position:- Page 57

2021 Mazda CX-30 Cx 30 Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

WARNING

Always attach the tether strap to the
correct tether anchor position:

Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the
child-restraint system moves it could
result in death or injury to the child.

Always remove the head restraint and
install child-restraint system:

Installing a child-restraint system
without removing the head restraint is
dangerous. The child-restraint system
cannot be installed correctly which
may result in death or injury to the
child in a collision.

(Except Mexico)

1. Tether strap
2. Anchor bracket
3. Forward

Always install the head restraint and
adjust it to the appropriate position
after removing the child-restraint
system:

Driving with the head restraint
removed is dangerous as impact to the
occupant's head cannot be prevented
during emergency braking or in a
collision, which could result in a
serious accident, injury or death.
Refer to Head Restraints on page 2-16.

Using Automatic Locking Mode
(Except Mexico)

Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped
child-restraint system to the rear
LATCH lower anchors. Refer to “Using
LATCH Lower Anchor” (page 2-47).

NOTE

Follow the child-restraint system
manufacturer's instructions carefully. If
you are not sure whether you have a
LATCH system or tether, check in the
child-restraint system manufacturer's
instructions and follow them
accordingly. Depending on the type of
child-restraint system, it may use
LATCH system instead of seat belts or if
the belt goes across the child's chest,
may recommend against using
automatic locking mode.

1. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.

2. Remove the head restraint.

However, when installing a backless
booster seat, always install the
vehicle head restraint to the seat
where the backless booster seat is
installed.
Refer to Head Restraints on page
2-16.

Essential Safety Equipment

Child Restraint

2-41

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Detailed Information for 2021 Mazda CX-30 Cx 30 Owners Manual

Lists of information found in 2021 Mazda CX-30 Cx 30 Owners Manual - Page 57

  • 1. Tether strap 2.
  • 3. Forward Always install the head restraint and adjust it to the appropriate position after removing the child-restraint system: Driving with the head restraint removed is dangerous as impact to the occupant's head cannot be prevented during emergency braking or in a collision, which could result in a serious accident, injury or death.
  • 16. ▼ Using Automatic Locking Mode (Except Mexico) Follow these instructions when using a child-restraint system, unless you are attaching a LATCH-equipped child-restraint system to the rear LATCH lower anchors.
  • 1. Make sure the seatback is securely latched by pushing it back until it is fully locked.
  • 2. Remove the head restraint.

Related Documents for 2021 Mazda CX-30 Cx 30 Owners Manual