Remote Retrieval; Programming the Paging Number; Using the Remote Access Code- Page 92

82

C H A P T E R   N I N E

Programming the Paging Number

1

Press 

Menu

, 

8

, 

6

.

2

Press 

Z

 or 

X

 until the screen displays

PAGING

3

Press 

Set

. The screen prompts you to enter your pager number.

PAG#:

ENTER & SET

4

Enter your paging number up to 20 digits. This is the telephone
number which your machine must call.

5

Press 

Set

.

6

Press 

Stop

 to exit.

You cannot change a Paging number remotely.

Remote Retrieval

You can call your machine from any touch tone phone (or remote Group
3 fax machine set for tone) and use a Remote Access Code and other
button presses to retrieve voice (and fax) messages. You can also
program and change some settings for your Message Manager.

Using the Remote Access Code

1

Dial your machine phone number from a touch tone phone.

2

When your machine answers and beeps, immediately enter your
Remote Access Code.

3

The machine signals the kinds of messages received:

1 long beep—Fax message(s)

2 long beeps—Voice message(s)

3 long beeps—Fax and Voice message(s)

No beeps—no messages

4

The machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, the
machine hangs up. If you enter an invalid command, the machine
beeps three times.