If in any doubt contact your Network Administrator for - Page 81

9 - 3 BROTHER INTERNET FAX PRINTING SOFTWARE

NC9100h_FM6.0

During the installation you are presented with the following screen, 
select the default unless you have previously installed this software. 
If this is the case use a port number that has not been previously 
configured. Example BFP2

You also need to enter certain information into the printer driver 
dialog screen as illustrated below.

It is very important that you enter your own E-mail address. You also 
need to configure the SMTP mail server IP address or host name as 
illustrated above.

If in any doubt contact your Network Administrator for 
assistance

When Installing BFP on Windows

®

2000 and XP operating systems we 
recommend that you add a “:” to the 
end of the port name, so BFP1 = 
BFP1:

This can be the host 
name or IP address of 
the   E-mail server

Here you can enter the default E-mail 
address or you can leave it blank.
* If an address is specified here this 

will always be used as default 
sending address.