Reloading the Print / FAX Server Firmware; General; Reloading the Print / FAX Server - Page 94

APPENDIX A - 3

NC9100h_FM6.0

Reloading the Print / FAX Server 
Firmware

General

The firmware on the Print/Fax server is stored in flash memory. This 
means that you can upgrade the firmware by downloading the 
appropriate update file. To get the latest firmware update, visit the 
Brother Solutions web site at http://solutions.brother.com/

Because of this, we STRONGLY recommend that you make a note 
of the current Print/Fax server configuration before you upgrade. To 
do this, print out a configuration page (Refer to this User’s Guide 
Chapter 3 for information on how to print a configuration page).

There are two methods of upgrading the firmware in your Brother 
Print/Fax server:

1

Use the BRAdmin Professional utility (Recommended)

2

Use another system (such as a Novell or Unix system to send 
the new firmware file to the Print/Fax server).

Some software versions that we provide will automatically 
factory reset your Print/Fax server parameters. We try to 
avoid doing this. However, if we add a significant new feature 
to our Print/Fax server, it can result in the Print/Fax server 
being factory reset.